Skip to content

Popular searches
Not sure what to search? Try the runtime calculator
Will it run my…

Can a power station run a CPAP (no humidifier)?

Updated
Short answer

Yes, easily. With the humidifier off, a CPAP uses about 7 W, so a 288 Wh power station lasts about four 8-hour nights and a 1,000 Wh unit lasts about 15 nights.

Calculate your runtime
Running
7 W
5–15 W range
Start-up
10 W
Runs
100%
of the time

CPAP power supplies carry big numbers on the label. ResMed's AirSense 10 lists 53 W typical and 104 W peak. Those are ratings for the power supply, which also has to feed the heated humidifier, not what the blower uses on its own. With the humidifier off, the machine itself needs only a few watts. Using a heated humidifier? It needs three to five times as much power, so see our CPAP with heated humidifier page for those numbers.

Because a CPAP has no real start-up surge, any station in our table can run it. The only question is how many nights you need. At 7 W, an 8-hour night uses about 56 Wh. After inverter losses, that is roughly 66 Wh of battery per night. A 288 Wh unit covers about four nights, a 500 Wh unit about seven, and a 1,000 Wh unit about 15. Even at 10 W, a 288 Wh station still gives you about three nights.

This is the one job where a small, light station makes real sense. You do not need a 2,000 Wh unit for a CPAP alone. Buy bigger only if you also want to run a fridge, a router or other devices from the same battery. A power station should never be your only backup for a CPAP or any equipment you rely on to breathe. Talk to your equipment supplier about outage plans, and register with your utility's medical-needs program so they know you depend on power.

How long does each power station run a CPAP (no humidifier)?

At about 7 W on average, a CPAP (no humidifier) runs for about 4 nights (35 hrs) on the 286 Wh EcoFlow RIVER 3 Plus, about 15 nights (121 hrs) on a 1,000 Wh-class unit (998–1,070 Wh) and about 62 nights (497 hrs) on the 4,096 Wh EcoFlow DELTA Pro 3.

Swipe sideways for battery size, output and price →

Nights (8 hours each) a CPAP (no humidifier) runs on each power station, from a full charge with nothing else plugged in (15% inverter loss). Sorted by battery size.
Power stationNightsBatteryOutput / surgePrice range
EcoFlow RIVER 3 Plus4 nights (35 hrs)286 Wh600 / 1,200 W$180–$300
BLUETTI Elite 30 V24 nights (35 hrs)288 Wh600 / 1,500 W$180–$280
Jackery Explorer 300 v24 nights (35 hrs)288 Wh300 / 600 W$200–$280
Goal Zero Yeti 5007 nights (3 days)499 Wh500 / 1,000 W$340–$500
Goal Zero Yeti 1000 (6th Gen)15 nights (5 days)998 Wh2,000 / 3,600 Wlist price about $1,200
Anker SOLIX C1000 Gen 215 nights (5 days)1,024 Wh2,000 / 3,000 W$400–$600
BLUETTI Elite 100 V215 nights (5 days)1,024 Wh1,800 / 3,600 W$380–$500
DJI Power 1000 V215 nights (5 days)1,024 Wh2,600 / 2,600 W$340–$450
EcoFlow DELTA 315 nights (5 days)1,024 Wh1,800 / 3,600 W$500–$700
EcoFlow DELTA 3 Plus15 nights (5 days)1,024 Wh1,800 / 3,600 W$550–$800
Jackery Explorer 1000 v216 nights (5 days)1,070 Wh1,500 / 3,000 W$430–$560
BLUETTI AC18017 nights (6 days)1,152 Wh1,800 / 2,700 W$400–$500
Jackery Explorer 2000 v230 nights (10 days)2,042 Wh2,200 / 4,400 W$700–$1,000
Anker SOLIX C2000 Gen 231 nights (10 days)2,048 Wh2,400 / 4,000 W$700–$900
DJI Power 200031 nights (10 days)2,048 Wh3,000 / 3,600 W$700–$1,300
BLUETTI Elite 200 V231 nights (10 days)2,074 Wh2,600 / 3,900 W$700–$900
BLUETTI Apex 30041 nights (14 days)2,765 Wh3,840 / 7,680 W$1,200–$1,600
Jackery HomePower 300046 nights (16 days)3,072 Wh3,600 / 7,200 W$900–$1,500
Anker SOLIX F3800 Plus58 nights (19 days)3,840 Wh6,000 / 9,000 W$2,090–$2,700
EcoFlow DELTA Pro 362 nights (21 days)4,096 Wh4,000 / 8,000 W$2,400–$3,700

Estimate: battery Wh × 0.85 ÷ 7 W average (7 W × 1 duty), with 8 hours of use a night. Your model may draw more or less; check its label. Prices are typical ranges we checked by hand on October 9, 2026, not live prices.

CPAP (no humidifier) on each power station

Where these numbers come from

ResMed measured its AirSense 10 AutoSet at about 7 W with the humidifier off, so an 8-hour night uses roughly 60 Wh, and its bilevel AirCurve models measured 9 to 10 W. Higher pressure settings use a little more. A battery should never be the only backup for life-support equipment.

Sources

  1. ResMed: power consumption of Air10 devices · document.resmed.com · PDF
  2. Lofta: ResMed AirSense 10 product page · lofta.com
  3. CPAP.com.au: ResMed AirSense 11 product page · cpap.com.au

We do not test units ourselves. Picks come from the official spec sheets and manuals, the watt-hour math on this site, and prices we check by hand. How we pick

Stations that can bridge a short outage for a CPAP (no humidifier)

EcoFlow RIVER 3 Plus portable power station, front view

EcoFlow RIVER 3 Plus

$180–$300 · price checked October 9, 2026

About four nights at 7 W in a 10 lb unit. Lists a 10 ms UPS switch-over and has a 12V car port for a DC cord.

Bridges
4 nights (35 hrs)
Battery
286 Wh
Output
600 W (1,200 W surge)
UPS switch-over
10 ms
12V car port
Yes
Weight
10.4 lb
Full specs and runtimes for the EcoFlow RIVER 3 Plus →
Jackery Explorer 1000 v2 portable power station, front view

Jackery Explorer 1000 v2

$430–$560 · price checked October 9, 2026

About 16 nights at 7 W, with room to run a router or a fridge from the same battery. Lists a 20 ms UPS switch-over.

Bridges
16 nights (5 days)
Battery
1,070 Wh
Output
1,500 W (3,000 W surge)
UPS switch-over
20 ms
12V car port
Yes
Weight
23.8 lb
Full specs and runtimes for the Jackery Explorer 1000 v2 →
BLUETTI Elite 30 V2 portable power station, front view

BLUETTI Elite 30 V2

$180–$280 · price checked October 9, 2026

About four nights at 7 W. Lists a 10 ms UPS switch-over and has a 12V car port for a DC cord.

Bridges
4 nights (35 hrs)
Battery
288 Wh
Output
600 W (1,500 W surge)
UPS switch-over
10 ms
12V car port
Yes
Weight
9.5 lb
Full specs and runtimes for the BLUETTI Elite 30 V2 →

Make it last longer

  • • If your CPAP maker sells a 12V DC cord or converter for your model, plug it into the station's car port. That skips the inverter, which loses about 10 to 15% of the battery.
  • • Check the station's settings for an output timer or eco mode. If it can switch off the AC or DC port when the load is low, turn that off for overnight use so a small load like a CPAP is not cut.
  • • Turn on UPS or pass-through mode at bedtime if your station has it, and test it once by unplugging the station from the wall while the CPAP runs.
  • • Keep the station charged between outages. Check it regularly and top it up, so it is full when the power goes out.

Add the rest of your devices

Yes, it can run this, about 35 hrs (about 4 nights at 8 hours a night) for a CPAP (no humidifier) on the EcoFlow RIVER 3 Plus.

Step 1

What do you want to run?

  • CPAP (no humidifier)
    Number of CPAP (no humidifier): 1
Add more
Step 2

Pick a power station

600 W output · 1,200 W surge · full specs

For a CPAP (no humidifier) on the EcoFlow RIVER 3 Plus:

Yes, it can run this
Estimated runtime
35 hrs
About 4 nights at 8 hours a night.
Running load
7 W
Average draw
7 W
Biggest surge
10 W
  • • Everything fits within the 600 W output and 1,200 W surge rating.

Math: battery Wh × 0.85 ÷ average watts. Cold weather, battery age and screen-on time all shorten this.

Power stations that can run this

We may earn a commission if you buy through these links. It doesn't change your price. How we make money

Price ranges checked by hand on October 9, 2026. Prices change often.

About 35 hrs
4 nights · 1 device on EcoFlow RIVER 3 Plus
See result

Common questions

How long will a power station run a CPAP without a humidifier?
About four 8-hour nights on a 288 Wh unit, about seven on a 500 Wh unit, and about 15 on a 1,000 Wh unit. In hours, that is about 35, 60 and 120 to 130. It is based on about 7 W, which ResMed measured for the AirSense 10 with the humidifier off.
What is the smallest power station that will run a CPAP all night?
Every station in our table can do one night. The smallest, at 288 Wh, lasts about four 8-hour nights at 7 W. If your machine draws closer to 15 W, plan on about two nights from the same unit.
Why does my CPAP power supply say 53 W if it only uses 7 W?
The label rates the power supply, which has to handle the heated humidifier and tube at full output. With those off, the blower alone uses a small fraction of that. The AirSense 10 lists 53 W typical and 104 W peak but measured about 7 W with the humidifier off.
Is a power station enough backup for a CPAP?
It is a good backup, but it should not be the only one. Batteries can run down or fail. Ask your equipment supplier what they recommend, keep the station charged, and register with your utility's medical-needs program so they know you depend on power.

Related “will it run” questions