Skip to content

Popular searches
Not sure what to search? Try the runtime calculator
DJI · Will it run?

Can the DJI Power 1000 V2 run a window AC 5,000 BTU?

Published
Short answerYes

Yes. The DJI Power 1000 V2 runs a window AC 5,000 BTU for about 4 hours from a full charge. It needs about 1,350 W for a moment when the compressor starts, within the 2,600 W surge rating, then about 450 W while running against 2,600 W continuous.

Add your other devices to the DJI Power 1000 V2 in the calculator

Key numbers

Runtime
4 hrs
from a full charge
Battery used per hour
26%
at 225 W average

Window AC 5,000 BTU

Running
450 W
400–550 W range
Start-up
1,350 W
Average
225 W
on 50% of the time

DJI Power 1000 V2

Battery
1,024 Wh
about 870 Wh usable
Output
2,600 W
continuous
Surge
2,600 W
start-up peak

How we worked it out: 1,024 Wh × 0.85 ÷ 225 W average (450 W × 0.5 duty) = about 4 hours. The 0.85 covers inverter and battery losses. We do not test units ourselves; the numbers come from the official spec sheets and typical device draws. How we pick

DJI Power 1000 V2 portable power station, front view

DJI Power 1000 V2

1,024 Wh · 2,600 W output · 2,600 W surge · 31.3 lb

Full specs and runtimes for the DJI Power 1000 V2

What else the DJI Power 1000 V2 runs

One device at a time, from a full charge.

Other power stations for a window AC 5,000 BTU

The nearest sizes that also run it.

Keep going

Real runtime depends on the model you own, room temperature and battery age. The 4 hours above is an estimate, not a measured result.

Common questions

How long will the DJI Power 1000 V2 run a window AC 5,000 BTU?
About 4 hours from a full charge. A window AC 5,000 BTU averages about 225 W (450 W running, on about 50% of the time), and the 1,024 Wh battery gives about 870 Wh after inverter losses. That is 26% of the battery an hour.
Will the DJI Power 1000 V2 start a window AC 5,000 BTU?
Yes. It needs about 1,350 W for a moment when the compressor starts, and the DJI Power 1000 V2 is rated for 2,600 W surge, 1.9 times that. Avoid starting other motors at the same moment.