Can the BLUETTI Elite 30 V2 run a well pump (1/2 HP)?
No. A well pump draws about 1,000 W while it runs, and the BLUETTI Elite 30 V2 can only put out 600 W continuously. The smallest unit we list that can run it is the 998 Wh Goal Zero Yeti 1000 (6th Gen), with 2,000 W output, for about 17 hours.
Add your other devices to the BLUETTI Elite 30 V2 in the calculatorKey numbers
- Runtime
- Can’t run it
- What stops it
- Output
- needs 1,000 W, has 600 W
Well pump (1/2 HP)
- Running
- 1,000 W
- 750–1400 W range
- Start-up
- 3,000 W
- Average
- 50 W
- on 5% of the time
BLUETTI Elite 30 V2
- Battery
- 288 Wh
- about 245 Wh usable
- Output
- 600 W
- continuous
- Surge
- 1,500 W
- start-up peak
How we worked it out: 288 Wh × 0.85 ÷ 50 W average (1,000 W × 0.05 duty) would be about 5 hours, but the output limit stops it first. The 0.85 covers inverter and battery losses. We do not test units ourselves; the numbers come from the official spec sheets and typical device draws. How we pick
BLUETTI Elite 30 V2
288 Wh · 600 W output · 1,500 W surge · 9.5 lb
Full specs and runtimes for the BLUETTI Elite 30 V2We may earn a commission if you buy through these links. It doesn’t change your price. How we make money
What else the BLUETTI Elite 30 V2 runs
One device at a time, from a full charge.
Other power stations for a well pump
The nearest sizes that can run it.
Keep going
Common questions
- Why can’t the BLUETTI Elite 30 V2 run a well pump?
- A well pump draws about 1,000 W while it runs, 167% of the BLUETTI Elite 30 V2’s 600 W continuous output. Overload protection would shut the outlets off.
- Which power station can run a well pump?
- The smallest one we list that can is the Goal Zero Yeti 1000 (6th Gen), with 998 Wh, 2,000 W output and 3,600 W surge, for about 17 hours. Closer to the BLUETTI Elite 30 V2’s size, the EcoFlow DELTA 3 Plus runs it for about 17 hours.