How long will the BLUETTI Elite 100 V2 run a well pump?

About 17 hours from a full charge. A well pump averages about 50 W (1,000 W running, on about 5% of the time), and the 1,024 Wh battery gives about 870 Wh after inverter losses. That is 5.7% of the battery an hour.

Will the BLUETTI Elite 100 V2 start a well pump?

Yes. It needs about 3,000 W for a moment when the pump starts, and the BLUETTI Elite 100 V2 is rated for 3,600 W surge, 1.2 times that. Avoid starting other motors at the same moment.

How much of the battery does a well pump use in a day?

About 1,200 Wh a day (50 W × 24 hours), more than the 870 Wh the BLUETTI Elite 100 V2 can deliver, so plan to recharge every 17 hours.

Bluetti · Will it run?

Can the BLUETTI Elite 100 V2 run a well pump (1/2 HP)?

Published October 12, 2026

Short answerYes

Yes. The BLUETTI Elite 100 V2 runs a well pump for about 17 hours from a full charge. It needs about 3,000 W for a moment when the pump starts, within the 3,600 W surge rating, then about 1,000 W while running against 1,800 W continuous.

Add your other devices

Key numbers

Runtime: 17 hrs; from a full charge
Battery used per hour: 5.7%; at 50 W average

Well pump (1/2 HP)

Running: 1,000 W; 750–1400 W range
Start-up: 3,000 W
Average: 50 W; on 5% of the time

BLUETTI Elite 100 V2

Battery: 1,024 Wh; about 870 Wh usable
Output: 1,800 W; continuous
Surge: 3,600 W; start-up peak

How we worked it out: 1,024 Wh × 0.85 ÷ 50 W average (1,000 W × 0.05 duty) = about 17 hours. The 0.85 covers inverter and battery losses. We do not test units ourselves; the numbers come from the official spec sheets and typical device draws. How we pick

BLUETTI Elite 100 V2

1,024 Wh · 1,800 W output · 3,600 W surge · 25 lb

Full specs and runtimes

Check price on Amazon Check price at Bluetti

We may earn a commission if you buy through these links. It doesn’t change your price. How we make money

What else the BLUETTI Elite 100 V2 runs

One device at a time, from a full charge.

Other power stations for a well pump

The nearest sizes that also run it.

Keep going

Real runtime depends on the model you own, room temperature and battery age. The 17 hours above is an estimate, not a measured result.

Common questions

How long will the BLUETTI Elite 100 V2 run a well pump?: About 17 hours from a full charge. A well pump averages about 50 W (1,000 W running, on about 5% of the time), and the 1,024 Wh battery gives about 870 Wh after inverter losses. That is 5.7% of the battery an hour.
Will the BLUETTI Elite 100 V2 start a well pump?: Yes. It needs about 3,000 W for a moment when the pump starts, and the BLUETTI Elite 100 V2 is rated for 3,600 W surge, 1.2 times that. Avoid starting other motors at the same moment.
How much of the battery does a well pump use in a day?: About 1,200 Wh a day (50 W × 24 hours), more than the 870 Wh the BLUETTI Elite 100 V2 can deliver, so plan to recharge every 17 hours.